加勒比中文字幕亚洲伦理 国产原创日韩无码 中文字幕无码乱在线 操bb国片四区三区

Wuxi Gotele Metal Products Co., Ltd : CN EN
Hot Dip Galvanized Steel Sheet for for Stamping Parts

Thickness: 0.13mm-4.0mm

 

Width: 600mm - 1250mm

 

Length: Less than 12 meters

Product DetailTechnical InformationPackagingMore

Introduction
Hot Dip Galvanized Steel Sheet is also used for stamping parts. The hot -dip galvanized steel is more corrosion resistant than bare 

iron and steel, similar to steel, zinc corrodes when exposed to the atmosphere; however,zinc corrodes at a rate approximately 1/30 of 

that for steel. 
The application environment in which galvanized steel is commonly used include indoor and outdoor atmosphere. The storage of 

hundreds of different chemicals. In fresh water,sea water,soils,concrete.and .or in conjunction with other metals, treated wood,or 

extreme temperatures. As used in corrosion protection, a wealth of real-world, long-term exposure data on zinc coating performance 

in a wide variety of environments is available.


Specification of Hot Dip Galvanized Steel Sheet (GI Sheet):

1. Capacity: about 15,000 tons per month for the steel sheet and coil product
2. Grade: SGCC, DX51D, Q195, all according to the customer's request
3. Standard: JIS G3302 1998, ASTM A653M/A924M 2004, all according to the customer's request
4. Thickness: 0.13mm - 4.0mm, all available.
5. Width: 600mm - 1250mm , all available.
6.Standard Size: 3'x6', 4'x4', 4'x5', 4'x6', 4'x8', 5'x10', etc
7. Elongation: Min. 7%
8. Zinc coating weight: 60g/m2-600g/m2 (z180, z200, z275, z275, z300)
9. Tensile strength: 28.1 - 49.2kgf/mm2
10. Edge: mill edge, cut edge 
11.Types of Galvanized Sheet Metal: (all of our patterns are custom-manufactured.)


12.Surface Treatment:

 
13.Spangle:



Different Types of Hot Dip Galvanized Steel Sheet (GI Sheet):
We are able to make galvanized sheet to further processsing, such as embossed sheet metal, checker steel sheet, perforated steel metal, corrugated roof sheet, and prepainted galvanized steel sheet. We provide various patterns for those different types. Please check the metal sheet types's table below. All of our metal sheet types are custom-manfactureed.  


The GALVANIZED STEEL SHEET PRODUCTS forming process consists of three basic steps: surface preparation,galvanizing and inspection.
Surface preparation consists of three steps: degreasing, acid pickling and fluxing.
Galvanizing is completely immersed in a bath of molten zinc.
A variety of simple physical and laboratory tests may be performed to determine thickness,uniformity,adherence, and appearance.



Shanghai Metal Corporation Standard Sheet Metal Gauge:


 


Packaging for Hot Dip Galvanized Steel Sheet (GI Sheet):

Shanghai Metal Products are packed and labeled according to the regulations and customer's requests. Great care is taken to avoid any damage which might be caused during storage or transportation. In addition, clear labels are tagged on the outside of the packages for easy identification of the product I. D. and quality information.

Application of Hot Dip Galvanized Steel Sheet (GI Sheet):

1.Construction and building: roofing; ventilating duct; handrail; partition panel,etc.

2.Further processing: coating base plate

3.Electric appliance: Refrigerator; washing machine; recorder; microwave, etc.

HomeTelProductsContact
CN EN
汉沽区| 罗城| 通江县| 宿松县| 信阳市| 资兴市| 登封市| 东莞市| 武宣县| 冕宁县| 罗江县| 安乡县| 宜章县| 峨眉山市| 信宜市| 新野县| 瑞安市| 高尔夫| 渝北区| 汨罗市| 新沂市| 太原市| 永寿县| 南平市| 岫岩| 南丹县| 辽宁省| 梁河县| 高青县| 玉树县| 郯城县| 甘泉县| 丹东市| 渝北区| 迁安市| 平原县| 大理市| 怀柔区| 湛江市| 沾益县| 娱乐|